5w 500 Lumens Mr16 GU10 Led Spotlights Bulbs, 45w Equivalent, Recessed Lighting,

5w 500 Lumens Mr16 GU10 Led Spotlights Bulbs, 45w Equivalent, Recessed Lighting

Why recommend to use a LED compatible driver 

LEDs require a driver to operate efficiently as standard transformers often have a minimum load requirement (generally around 20w). As LEDs consume such a low wattage, they usually struggle to meet this, and therefore fail to work effectively when being used with a normal transformer. 

LED drivers have no minimum wattage, so are fully compatible when powering individual, or multiple LED bulbs. LED drivers are also specifically designed to enhance the life span of LED’s, allowing them to run to their optimum performance. On the other hand, using LED’s with a standard transformer may have a detrimental effect on a bulb’s longevity.

MCOB LED Light Engine Core

With the system MCOB "Multi Cups / chip on board",
The low-power chips are arranged in a specific gradation and covered...

LED Lighting Component Supplier OEM ODM

What if you have preferred;
LED module, not exiting wattage;
Not exiting 6 cup - chip packing ?
Sanlibang is able to assist with different cup quantity encapsulation.

1) MCOB, (Multi Cups/Chip on Board) multi LED chips are packaged together as one lighting module. MCOB LED have great advantage of thermal resistance, larger cooling area, better lighting effect and high light efficacy.

An LED that has been exposed to high heat or thermal stress will typically lose efficiency which diminishes its brightness. HT-lights LED bulbs are equipped with high-performance aluminum heat sinks capable of removing thermal stress. 

It offers 500lm output and is perfect for work areas where a brighter light is needed. 

It is a great replacement for 45w Halogen GU10 spotlight, but uses only 5w of power to run.

The powerful light output and precise 60 degree beam angle make it perfect for all manor of uses in the home, including lighting rooms that have slightly taller ceilings than most. 

High CRI (Color Rendering Index) means that the LED is emitting more of the color spectrum than typical LEDs do, Your typical bright-blue tint LED drops red, orange and aqua wavelengths, but modern hi CRI emitters do a better job of outputting the entire spectrum.